Other Products and Custom Work

 

 
Custom-sized TH Tooks
If you prefer to tie turks heads with a certain number of bights, then a smaller Turks Head Tool can save you some time. I have them avaialble in sizes of four bights, six bights eight etc. Any of these can also be used to tie knots with smaller numbers of bights than their maximum.
Custom hardwood and exotic hardwood TH tools
The ones shown are made of rosewood and are designed for four bights and up to 10 bights. The larger of the two has an additional row of threaded holes for tying narrower knots.

The Needles
A VERY Popular item. Anodized aluminum needles which are bored and threaded at the back end to take various sizes of cord. These needles will change the way you tie knots. The anodized surface slides easily thru knots of synthetic or natural material. Colors will vary. See the ordering page for pricing.
Size 1 is useful for 0.8 to 1.4mm cord
Size 2 is useful for 1.0 to 2.0mm cord
Size 4 is useful for 2.0 to 3.0mm cord
Size 6 is useful for parachute cord
Size 8 is useful for 3.0 to 4.0mm cord
The Loop
This is modeled after one of Ashley's recommended tools but made from polished stainless steel wire. It is used for reaching thru a knot to pull ends back thru. They are sold unfinished and need to have a handle applied to your taste before use. They are approximately 5-6 inches long and will vary slightly from the ones pictured.

Flat-Circular Turks Head tool
This tool will assist you in tying the turks heads in a "Flat" configuration. They are avaialble in any number of bights up to 20 and in outer diameters from 2 to 10 inches. The one shown to the right is set up for seven bights in the picture but is capable of up to 20 bights. A full set of pins plus spares and a wrench are included with each of these tools.

Custom Cylindrical Turks Head tube
This tool is a T49x200-20 tube with an extra ring of 20 holes at the one-third point between the two end rings. This makes the tube conveniently capable of helping one produce knots up to 20 bights in three diferent lengths.
This is one of my most practical custom pieces.

This site is © Copyright knottool.com 2011, All Rights Reserved.
webmaster